Igniters for pellet burners, stoves and boilers

We manufacture igniters (ignition heating elements) for almost every model of pellet burner, stove and boiler — both air-ignition and contact-ignition types.

Every igniter is hand-built with Kanthal wire and load-tested before shipping. OEM-grade reliability — priced below the branded part.

6-month commercial warranty.

Standard models

Prices are per piece. Volume discounts — ask for the trade price list.

Igniter for Ferroli and Lamborghini (with air tube)

For Ferroli Sun P7 (13–34 kW), Ferroli Sun P12 (30–55 kW), Lamborghini 3.4P and FER pellet burners.

• Kit with air tube, 1/2″ thread
• Power: 350 W · Voltage: 230 V

Igniter for Greyko

For Greyko RB 20, RB 30, RB 50 and RB 100 pellet burners — and for boilers originally fitted with a ceramic igniter. Built to the original’s pattern; the design targets the most common failure of ceramic igniters (vibration cracking).

• Voltage: 230 V

3/8″ threaded igniter — 140 mm

Replaces an original 3/8″ igniter of the same length. OEM igniters have a Ø9.5–10 mm body — ours has a heavier-duty Ø12 mm body, a direct replacement.

• Length 140 mm · 3/8″ thread
• Ø12 mm body · Voltage: 230 V
• Used in some AMG, Adler, BURNiT, Ravelli, Qlima models — check the length of your old igniter

3/8″ threaded igniter — 150 mm

Replaces an original 3/8″ igniter of the same length. OEM igniters have a Ø9.5–10 mm body — ours has a heavier-duty Ø12 mm body, a direct replacement.

• Length 150 mm · 3/8″ thread
• Ø12 mm body · Voltage: 230 V
• Used in some MCZ, Palazzetti, Ravelli, Rika, CS Thermos models — check the length of your old igniter

3/8″ threaded igniter — 160 mm

Replaces an original 3/8″ igniter of the same length. OEM igniters have a Ø9.5–10 mm body — ours has a heavier-duty Ø12 mm body, a direct replacement.

• Length 160 mm · 3/8″ thread
• Ø12 mm body · Voltage: 230 V
• For a 3/8″ × 160 mm igniter — check the length of your old one

3/8″ threaded igniter — 170 mm

Replaces an original 3/8″ igniter of the same length. OEM igniters have a Ø9.5–10 mm body — ours has a heavier-duty Ø12 mm body, a direct replacement.

• Length 170 mm · 3/8″ thread
• Ø12 mm body · Voltage: 230 V
• Used in some BURNiT, Palazzetti, Pasqualicchio, Royal models — check the length of your old igniter

3/8″ threaded igniter — 180 mm

Replaces an original 3/8″ igniter of the same length. OEM igniters have a Ø9.5–10 mm body — ours has a heavier-duty Ø12 mm body, a direct replacement.

• Length 180 mm · 3/8″ thread
• Ø12 mm body · Voltage: 230 V
• For a 3/8″ × 180 mm igniter — check the length of your old one

3/8″ threaded igniter — 190 mm

Replaces an original 3/8″ igniter of the same length. OEM igniters have a Ø9.5–10 mm body — ours has a heavier-duty Ø12 mm body, a direct replacement.

• Length 190 mm · 3/8″ thread
• Ø12 mm body · Voltage: 230 V
• For a 3/8″ × 190 mm igniter — check the length of your old one

Igniter for Pellas and Mareli

For Pellas and Mareli pellet burners — built to the original’s pattern.

Igniter for IVG Waterland

For IVG Waterland pellet systems — built to the original’s pattern.

Ceramic igniters

• Ceramic igniter 3/8″, ~90 mm, 300 W, 230 V
• Low-voltage ceramic igniter, 60 mm, 100 W, 24 V

Price: on request

Smooth-body igniter — for Italian stoves

Smooth body Ø9.9 / Ø12.5 mm for MCZ, Edilkamin, La Nordica / Extraflame, Palazzetti, Thermorossi, Ravelli, Cadel, Piazzetta and other pellet stoves.

• Lengths: 140–230 mm · Power: 250–400 W · Voltage: 230 V

Price: on request

Don’t see your model? These are just the standard series. We build to sample for practically any model — send a photo and measurements.

Compatible brands

Pellet burners: Ferroli (Sun P7, Sun P12), Lamborghini (3.4P), FER, Greyko (RB 20–100), Pellas, Mareli, IVG Waterland, Burnit, GP (20, 20+, 25, 32), Bisolid, Anselmo Cola, B-max, GreenEcoTherm, Pelltech, Ecospar and others.

Pellet stoves and boilers: MCZ, Edilkamin, La Nordica / Extraflame, Palazzetti, Thermorossi, Ravelli, Cadel, Piazzetta, Arca, Prity, Alfa Plam, Erato, Sunsystem and others.

The list is indicative — if your brand isn’t here, write to us: we make igniters to sample.

How to identify your igniter

You don’t need to know the brand. Four things are enough:

• Thread, flange or smooth body — most commonly 3/8″ or 1/2″ thread;
• Body diameter (mm);
• Length — with or without the thread/flange (say which);
• Wattage and voltage — printed on the old igniter or in the documentation.

A photo of the old igniter plus these measurements gets you an exact quote.

Why our igniters last

The igniter is treated as a consumable — and at mass producers, quality varies even within a single batch. We hand-build and test every igniter, which lets us eliminate the hidden defects automated production bakes in.

The most common failure of ceramic igniters is cracking from burner vibration and contamination by pellet dust — our design targets exactly that, after extensive real-world testing. The heavier body (Ø12 vs Ø9.5–10 on the originals) is part of the answer.

For service companies and resellers

Volume discounts and standing terms for regular partners. Email us for the trade price list: office@nagrevatel.bg.

Lead times

Igniters with a listed price are in stock. Made-to-order igniters take 10–15 working days; express service for urgent orders — on request.

Frequently asked questions

How often should a pellet burner igniter be replaced?

It depends on how often it fires and the igniter’s quality — usually every 1–2 heating seasons. An igniter that fires several times a day wears faster.

Can I replace the igniter myself?

In most burners, yes — it’s within reach of a technically minded owner. On Ferroli-type kits the heater demounts from the air tube and is replaced on its own.

Your igniter is Ø12 mm but my original is Ø9.5 — will it fit?

Yes — it’s designed as a direct replacement. If you’re unsure about your model, send a photo and measurements and we’ll confirm before you order.

What are the signs of a burnt-out igniter?

The burner won’t light, or lights slowly and after several attempts, while the feed system works and the nozzle is clean.

What should I send to get a quote?

A photo of the old igniter and its measurements (diameter, length, thread/flange), plus wattage and voltage if legible. We reply with a firm price and lead time.

Is there a warranty?

Yes — a 6-month commercial warranty covering manufacturing defects. It does not cover damage from improper use: a clogged or unmaintained device, blocked airflow and resulting overheating. The commercial warranty does not affect consumers’ statutory rights.

Do you make igniters for models outside the list?

Yes — we build to sample for practically any burner, stove or boiler model.

Order or ask

Phone: +359 889 222 015
Email: office@nagrevatel.bg